Effectively removes rust and tarnish from carbon steel, stainless steel,
cast iron , on, copper, brass, solder and chrome.
Non-polluting. Will not harm human skin or adversely affect most paints, plastics, wood,
textiles, ceramics or rubber. Biodegradable, nontoxic, user friendly,
non-flammable product that is safe on hands. Package: 16 oz. spray bottles (0.47 liters), 5 gallons (19 liters) and 55 gallons
(208 liters).
Nonhazardous corrosion remover in powder form. Mix with water at a
rate of 0.33 up to 0.66 pounds per gallon of ordinary water. You control
the concentration! Contains VCI to prevent flash
corrosion. Package: 5 pounds, 50 or 100 pound drums. Can be
purchased online at our corrosion protection store. Look for the rust
removing products category.
Rust Convertor Converts Rust
to Protective Primer
Rust Convertor is a direct to rust primer for difficult to adhere to
surfaces. It can be applied directly to rusted metal surfaces and it
will penetrate to the metal surface, eliminate rust, seal, prime and
convert all rust to a smooth ready to top coat rust free surface. It
prevents further rusting. Great for marine environments and the presence
of chlorides. It is a water based, low VOC, non-flammable, non-toxic
coating that provides up to ASTM Salt Spray 500 hours of protection @ 3 MIL
DFT. Can be overcoated with water or solvent based coatings.
Package: 4 litre jugs, 5.3 us gallons and drums
Cleaning
and Rust Removing (Removal) Products Catalog
View or download the 1.5 Mb adobe file of cleaning and rust removal products here. Includes links to product data sheets and rust
removal product information. Opens in a separate window so you can
continue browsing.
VCI Products-Store The
place to buy VCI a limited cross section of VCI Products
VCI Corrosion & Rust Control Products Store A
large categorized internet shop with pictures and short descriptions of VCI
Temporary Coatings, VCI paper, VCI poly (plastic),
cleaners, degreasers, temporary and permanent VCI coatings, Daubert Nox-Rust
Liquids and more available
for purchase online.
Water Treatment Store
Has a section for miscellaneous water treatment products in this online store.
VCI Industrial Corrosion Control Packaging The
place to shop for VCI plastic packaging, vci pallet wrap, vci film sheets and
bags. Recyclable rust control poly (plastic) film, sheets and
bags.
VCI Paper rust and corrosion control paper in
a variety of shapes, constructions and grades.
FAQ'S
Q. Is there a specific way to use a rust remover?
A. Yes, there is. When you want to remove corrosion from a surface there is a
basic process you must follow. First, the part should be cleaned of any oil
and/or debris. This gives the rust remover easy and direct access to the
corrosion on the surface of the part.
After cleaning the part should be placed into a bath, or coated with the
gelled version, of the rust remover you have chosen for the task at hand (Kpr's staff will be happy to help you select the proper product for your
application). Once the part is free of rust it should be rinsed with an
alkaline cleaner to help neutralize the surface. This step is critical as
rinsing alone may not get all of the rust remover off of the surface, and acids can be
corrosive over time. Once neutralized the part is ready for further
processing.
Q. My data sheet says to apply a VCI coating at 1.5 to 3 mils DFT. What does DFT
stand for and how do I know if I have applied the proper coating thickness?
DFT stands for dry film thickness. You may also see the
abbreviation WFT for wet film thickness. Second, there are two ways to
determine if you have the proper coating thickness. The first
method for determining film thickness is to use an electronic thickness gauge.
This unit is used after the coating is dry, and is simply placed on a painted
surface and electrically determines the thickness of the coating. These units
are fairly accurate but can be expensive to purchase. The disadvantage
of an electronic unit is that it can not be used until the coating
is dry. A better tool for most customers is a wet film gauge. Wet film gauges
are inexpensive, sometimes as low as a few dollars, and are used while the
coating is wet. This allows you to add extra paint if there is too little on
the part. To use a wet film gauge you must know what wet film thickness is
required for desired dry film thickness.
Q. Does it matter what cleaner I put in my pressure washer,
or will they all work?
A. It matters quite a bit what cleaner you use for pressure washing
applications where the cleaner is circulated through the unit. Some cleaners
are made to have good foaming action, which can be very helpful in some
applications. This same cleaner put into a re-circulating pressure washer would
foam excessively and discharge from the unit, like the putting liquid
dishwashing detergent in an automatic dish washer machine.
For any high pressure or circulating pressure washer application
you want to use a non-foaming cleaner or add defoamer. This will provide clean parts
and corrosion protection with-out excessive foaming out of the parts washing
machine.
[ Home ] [ Feedback ] [ Product Data ] [ Search ] [ Links ] Online
Web Store
[ REQUEST QUOTES ] [ VCI Works ] [ Applications ] [ NEWS ] [ Rust Protection ] [ Rust Removing ] [ Save Money ] [ VCI Paper ] [ Product Index ] [ VCI PLASTICS ] [ Vapor Barrier Foil ] [ Food Grade ] [ Applications ] [ VCI Selection Help ] [ VCI Emitters Corrosion Protection ] [ VCI Vapor Corrosion Inhibitor Foam Inserts for Corrosion Protection ] [ Photo Gallery ] [ NDT F.D. Test Kit ] [ VCI Sale Items ] [ Payment Terminal ] [ FDA Approved ] [ Silver Guard ]
[ REQUEST QUOTES ] [ VCI Works ] [ Applications ] [ NEWS ] [ Rust Protection ] [ Rust Removing ] [ Save Money ] [ VCI Paper ] [ Product Index ] [ VCI PLASTICS ] [ Vapor Barrier Foil ] [ Food Grade ] [ Applications ] [ VCI Selection Help ] [ VCI Emitters Corrosion Protection ] [ VCI Vapor Corrosion Inhibitor Foam Inserts for Corrosion Protection ] [ Photo Gallery ] [ NDT F.D. Test Kit ] [ VCI Sale Items ] [ Payment Terminal ] [ FDA Approved ] [ Silver Guard ]
[ KPR ADCOR INC ] [ Feedback ] [ Product Data ] [ Search ] [ Links ]
|